phone +0086-371-86151827

email [email protected]

jis sb480m 500 tons exported to Vietnam

BBN steel various machining process service for jis sb480m products. Flame cutting is a traditional thermal cutting method. The thickness of the cut metal ranges from 1 mm to 1.2 meters. However, when the thickness of most of the low carbon steel plates you need to cut is below 20 mm, other cutting methods should be used. In order to cut accurately and effectively, the operator needs to have superb skills to avoid the thermal deformation of the metal plate in time during the cutting process.

07Cr2AlMoR chemical composition analysis: C: no more than 0.09, Si: 0.2-0.5, Mn: 0.4-0.9, Cu: no more than 0.3, Ni: no more than 0.3, Cr: 2.0-2.4, Mo: 0.3-0.5, P: no more than 0.02, S: no more than 0.01.Industry application of jis sb480m, 07Cr2AlMoR steel plate: it is mainly used for manufacturing spherical tanks, and can also be used for manufacturing single-layer welding vessel, multi-layer hot sleeve welding vessel, multi-layer binding vessel and other class II and III vessels and low-temperature pressure vessels.

On November 25, the price of the jis sb480m medium board in the Yinchuan market remained stable temporarily, and the market transactions were average. As of press time, Yinchuan market 16-25mm general medium plate is 4020 yuan/ton; 14-25mm low alloy medium plate is 4170 yuan/ton. The price of plate in Yinchuan market continued to stabilize without much change. However, as the temperature dropped sharply and terminal demand in the local market dropped to a low point, plate merchants in the Yinchuan market had difficulty shipping.

Pre:BBN material jis sb480m steel equivalent grades

Next: Temperature range of factory 18MnMoNbR sheet

Leave a Reply