The qualified flat steel has sufficiently high high temperature strength and high temperature plasticity. Therefore, sb450 sheet density flat steel is not only required to have high enough normal temperature and instantaneous high temperature tensile strength and plasticity, but also long-term strength and long-term plasticity to ensure long-term safe work at high temperatures, especially under creep leakage conditions. The product thickness is 8-50mm, width 150-625mm, length 5-15m。
For the sb450 sheet density construction industry, the largest consumer sector of the steel industry and the least affected industry in the EU this year, it is estimated that sb450 sheet density steel consumption will account for 35% of the EU steel consumption market this year. Uestf forecasts that the output of the construction industry will decline by 5.3% in 2020 and rise by 4% in 2021.
Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;
Compared with sb450 sheet density, boiler steel plates should have the following properties: (1) High medium temperature strength: low and medium pressure boiler drums use steel with a lower yield point, high pressure boilers use steel with a high yield point. (2) Good plasticity, impact toughness, cold bending and welding performance. (3) The notch sensitivity is small, that is, the sensitivity to the stress concentration caused by the opening of the steel plate surface and the welding of the pipe head is small.