phone +0086-371-86151827

email [email protected]

  • Home
  • project
  • 15mo3 vs 16mo3 production line in Singapore

15mo3 vs 16mo3 production line in Singapore

The ASTM A213 T9 alloy tubing heat exchange finned tube is the most used heat exchanger tube in the heat exchange of gas and liquid. It is to add fin to the common base tube to enhance heating, so as to achieve the fast heat transfer of heat exchanger through heat exchange finned tube. According to the type of materials 15Mo3 vs 16Mo3 , it is divided into single-metal finned tube and bimetal finned tube.

Preheating cutting: The most effective way to prevent steel plate cutting cracks is to preheat before cutting. Before flame cutting, the steel plate is usually preheated, and the preheating temperature mainly depends on the quality level and thickness of the steel plate. The preheating method can be carried out with flame burner, electronic heating pad, or heating furnace. In order to determine the preheating effect of the steel plate, the required temperature should be tested at the heating point.

Mg element can reduce the number, size, distribution and morphology of inclusions in steel such as 15Mo3 vs 16Mo3. Micro Mg can improve the size and distribution of carbides in bearing steel. And the carbide particles of bearing steel containing magnesium are fine and uniform. When Mg content is 0.002% - 0.003%, the tensile strength and yield strength of the steel increase by more than 5%, and the plasticity remains basically unchanged.

BBNsteel 15Mo3 vs 16Mo3 medium plate product discount: 17.5*2850*8450, 18.5*1940*12100, 18*2770*4000, 19.5*2980*12050, 20*3000*8570, 19.5*1970*4000, 18.5*1640*8450, 19.5*1490*8500, 19*2580*4700, 20*3200*9000, 20*1600*7740, 18.5*1850*14050, 19.5*1910*6300, 21*1630*6000, 22*1300*10000, 19*2640*7810, 21*2650*7500, 21*1920*8220, 22*1380*7650, 21*1920*9270, 20.5*1590*6000, 21*2980*6460.

Pre:what is 15mo3 pipe astm equivalent direct price

Next: The 15mo3 material specification density

Leave a Reply